For Those of You Who May be Curious as to What's Involved in the Installation of an Automatic Irrigation System . . .

The GreenScape.ca Way . . .

Plumbing . . .

A hole is drilled in the foundation to access a source of water for the irrigation system, a copper pipe is then built out, and the hole is sealed around it.

Pipe Pulling . . .

Piping is pulled into the ground by our small Ditch Witch machine, specifically designed to disrupt your landscaping or lawns as little as possible.

Existing Landscaping . . .

When Greenscape.ca works with existing landscape or structural features, we take special care to ensure the quality of the finished product without disturbing them.

Valve Installation . . .

These images show a typical valve box installation in a new construction setting. The valve box is an accessible container for the junction of all the water lines that feed the various sprinklers. All that's left is to add the sod. In the case of an existing lawn, there would be no sod to replace

Sprinkler Installation . . .

This is a typical pop-up sprinkler installation – again in a new construction setting – before the sod has been applied. For existing lawns and landscaping, by using our Ditch Witch, no sod is required

Home | Residential | Commercial | LandScape Lighting | Material Counter

GreenScape.ca Watering Systems Ltd

54 Cleopatra Drive • Unit 2 • Ottawa • Ontario • K2G 0B3

613.723.8528 • Fax: 613.723.7582

These photographs will give you an idea of what's involved in a typical installation when Greenscape.ca installs your automatic sprinkler system.